CLI Command ReferencemetadataMakito X User’s Guide, v2.2, Issue 02 296metadataIMPORTANT Metadata processing is a licensed feature which may be installed at thefactory or via a field upgrade by installing a license file.S YNOPSISmetadata ID startmetadata ID stopmetadata create type=network port=udpport [addr=ipaddr] [name=text]-or-metadata create type=hdsdi [input=bnc1] [decimation=factor] [name=text]metadata ID deletemetadata ID set parameter=value [parameter=value ...]metadata ID getmetadata ID clearenable_metadata_on_serial_portenable_console_on_serial_portDESCRIPTIONThe metadata command is used to manage metadata sources. This command configuresthe Makito X to capture either KLV (Key Length Value) or CoT (Cursor on Target)metadata and then incorporate data information within the metadata elementary stream ofthe standard MPEG Transport Stream.The Makito X supports three metadata input types: either from the COM1 serial port, theHD-SDI interface, or a user definable UDP network port. The serial port and HD-SDIinterface are available on the Makito X-SDI only. UDP is always available.Multiple metadata sources can be multiplexed into the same Transport Stream. To do so,you must specify the metadata source ES IDs in the stream command (datasrc), usingmultiple comma-separated metadata source id/names.CoT/UDP and CoT/Serial metadata sources can also be retransmitted to other IP destina-tions for follow-up analysis by third party systems. For more information, see “CoTRetransmission” on page 304.You can define a small set of static KLV objects for KLV and CoT metadata sources. Thiscan be used to modify erroneous or insert missing mission IDs and security classificationwithin outbound TS steams. For more information, see “KLV Metadata Insertion” onpage 304.
