2511. FMFrom the main menu or after pressing [ ] / [MODE]repeatedly, activate operating mode FM (FM Radio):[ ]Main menuFMAlternatively, press [FM] on the remote control to switchdirectly to this operating mode.Stations that broadcast additional information regardingthe station and the programme, are highlighted onthe display with an RDS icon (Radio Data System).Additional information were displayed by pressing[ ] / [INFO].11.1 Scan settingThe search run setting allows you to determine whetherstations with low signal strength are ignored during theautomatic search run. Proceed as follows:[ ]Scan setting• To have the search run stop only at stations with highsignal strength, confirm the subsequent query byselecting YES. Otherwise, the search run will stop atevery station for which a signal is received.11.2 Automatic station search• Press and hold [ENTER/NAVIGATE] until theautomatic station search starts.• The radio stops the search and starts playbackwhen it finds a station.• Press [ENTER/NAVIGATE] to continue the searchuntil the next station is found.11.3 Manual station searchWhen you make station settings manually, you can definethe desired frequency yourself and tune into stations thatwere ignored during automatic station search becOffe theirsignals were too weak.• Turn [ENTER/NAVIGATE] (left: –0.05 MHz / right: +0.05MHz) until you see the desired frequency. Wait a momentuntil playback of the received station signal begins.11.4 PresetsYou can save up to 30 of your favourite stations for quickand direct access.11.4.1 Save favourites• Set the station that you would like to save as afavourite station preset.• If the station is received, press and hold [ ] /[MEMORY] on front of the radio.[ ]An overview window with the station presets shouldopen after approx. 2 seconds.• You can switch between the station presets (1 to 30)by turning [ENTER/NAVIGATE].• Press [ENTER/NAVIGATE] to save the station on thedesired station preset.