3015.3 Stopping the alarm/ Snooze functionAlarm tone (Buzz)• When the alarm activates, press [VOLUME/POWER],to stop the alarm.• Repeatedly press [SNOOZE] on the remote controlto activate snooze mode.• The alarm turns off for the selected time interval(5/10/15/30/60 minutes) before activating once again.Internet radio / DAB / FM• When the alarm activates, press [VOLUME/POWER] tostop the alarm.• Repeatedly press [SNOOZE] on the remote control toactivate snooze mode.• The alarm turns off for the selected time interval(5/10/15/30/60 minutes) before activating once again.• Repeatedly press [SNOOZE] on the remote control toactivate ON instead of snooze mode. The radio now staysswitched on.• If the alarm is not stopped, the radio automaticallyswitches into standby mode after one hour.16. System settingsYou can modify all settings and access importantinformation about the radio in the System settings.16.1 EqualiserThe equaliser allows you to adjust the sound of theradio to suit your preferences by amplifying or reducing the amount of bass or treble in the audio .You can choosefrom preconfigured profiles, adjusted to suit a variety ofmusic Genres, or create your own custom profile.• To set the Equaliser, proceed as follows:[ ]System settingsEqualiser• Use [ENTER/NAVIGATE] to choose one of thepreconfigured profiles.• To create your own equaliser profile, choose theoption My EQ profile setup.• This takes you to the bass, treble and loudnesssettings (volume amplification).• To adjust a particular value, press [ENTER/NAVIGATE]at the corresponding menu item and then change thevalue by turning [ENTER/NAVIGATE]. If playback isalready started when you modify these settings, youcan hear the changes in the audio immediately.• Confirm your settings by pressing ENTER/NAVIGATE]once more.• Complete the configuration process by pressing [ ]on the device and confirm the saving of settings bypressing [ENTER/NAVIGATE].• To use the new profile, choose the item My EQ.