Hama 00054836 Operating Instructions Manual

Hama 00054836 Operating Instructions Manual Manual pdf 36 page image

32• Alternatively, PBC setup can be initiated from theinternet settings of the radio:[ ]System settingsNetworkPBC WLAN setupPIN setup• Select your desired network. (Indicated by theprefix [WPS])• In the WPS menu, choose the Pin option andconfirm your selection by pressing [ENTER/NAVIGATE].• The radio generates an 8-digit code, which mustbe entered into the web or user interface of yourrouter or access point.• Consult the corresponding handbook for detailson configuring the router or access point.•Skip WPS / Pre-Shared Key (PSK) setup• Choose the item Skip WPS to proceed to key entry.• In networks that do not support WPS, you will godirectly to key entry.• In the input screen, enter the whole key and thenconfirm with OK.• If the key was entered correctly, the radio connects tothe access point and establishes the internet/networkconnection.Note• Often the Pre-Shared Key is printed on the back orbottom of the router or access point.• When entering the key, take notice of capitalisation.Open networkNote• We recommend against establishing unsecuredconnections and advise you to always protect yournetwork against unauthorised access.• If you plan to use an open network, you just haveto select the network ID from the list of availablenetworks and confirm. The radio then connectsimmediately to the network.16.2.3 Wired network connection (LAN)• Connect the radio to the router using a LAN cable. Thismethod of direct connection is the most reliable andleast susceptible to interference.• The cable connection is listed amongst the availableconnections as Wired. Simply select it to proceed. If theDHCP server of the router or access point is active, thenthe connection is now established automatically.• To find out how to determine whether the DHCP server isactive, please consult the operating instructions of yourrouter or access point.16.2.4 Manual configuration of network connection– wireless (WLAN) and wired (LAN)• To manually confi gure the network connection,proceed as follows:[ ]System settingsNetworkManual settings