3917.2.2 Procedure for Android users• Open the UNDOK app on your tablet or smartphone.• Tap the Set up audio system menu item.• Make sure that the radio or speaker is in SETUP mode.Set the product to the factory settings, if necessary.Confirm the query with Next.• On the following page, you will find a list of allavailable Wi-Fi networks as well as the suggestedaudio systems; the Hama product (for example, SetupHama DIR3120LED) should be listed here. Tap thecorresponding Wi-Fi network.• Now choose a name for the radio (for example, OfficeDIR3120) and confirm your entry with Next.• This takes you to the date and time settings – here youset the time format, time source and time zone.• The various network configuration options are thenoffered to you (where applicable, Wi-Fi, WPS andEthernet). Tap the desired method; the UNDOK appswitches to the next window.• Depending on the selected method, you can now selectand configure the desired Wi-Fi network, set up a WPSconnection or set up the connection using a LAN cable.• Finally, the radio connects to the network; by tappingStart using my audio system, you will be able to use thedevice in the UNDOK app.17.3 General control of a device or groupTo control a configured device, tap the relevant device/group in the selection list on the UNDOK home page.This takes you to the product’s playback screen; thefollowing functions are available:123457810119