Hama 00054836 Operating Instructions Manual

Hama 00054836 Operating Instructions Manual Manual pdf 35 page image

3116.2 Network16.2.1 Network wizard – Configuration of internetconnection / Automatic searchThe network wizard supports you to set up aconnection between the radio and internet. Hereby youcan choose between a wired LAN connection and awireless connection using WLAN/Wi-Fi. More methodsof configuration and detailed information are amplifiedsubsequently.• You can start the Network wizard as follows:[ ]System settingsNetworkNetwork wizard• When the wizard is started, the radio searches forWLAN (WiFi) connections and then shows a list ofthe available networks.• Turn [ENTER/NAVIGATE] to switch amongst thenetworks discovered. At the bottom of the list areoptions to restart the search ([Rescan]), select acable connection ([Wired]) or configure theconnection yourself ([Manual config ]).• If your network is not found or the SSID (Service SetIdentification, that is, the name of your network) isnot shown, the network may be hidden or out ofrange. In this case, try manual configuration orconnecting by LAN cable.16.2.2 Wireless network connection (WLAN)Depending on the network, there are a number of ways toconnect to it. Networks that support connection via WPS(Wi-Fi Protected Setup) are identified in the list as [WPS].Other connections are either open networks or connectionsprotected with a PSK, or Pre-Shared-Key.Desired networkWPS-/PSK-/ open network connectionWPS allows simple and nevertheless protected connectionof the radio to the network. Two options are availablefor this purpose: The connection can be set up by meansof PBC, or Push-Button Confi guration, or by the PINprocedure, in which the web interface of your routerprompts you to enter a randomly generated sequenceof numbers.PBC setup• Select your desired network. (Indicated by theprefix [WPS]).• In the WPS menu, choose the Push Button option andconfirm your selection by pressing [ENTER/NAVIGATE].• Press the WPS button on your router or current accesspoint. This can often be done using the web interface,as well.• Consult the operating instructions of your routeror access point for details.• Once the process has been started on the routeror access point, the radio should be able to findand connect to the network.