2 - 22 2020/4820/4820 i User’s GuideWand EmulationWand Emulation ConnectionThe Wand Emulation Connection barcodes should be used if you want to changethe terminal IDonly, without changing any other image scanner settings. Werecommend using Wand Emulation Plug & Play barcodes to program your imagescanner to emulate a wand reader. The Wand Emulation Plug & Play barcodeschange other parameters, in addition to changing the terminal ID. Please referto Wand Emulation Plug & Play on page 2-2 for further information.In Wand Emulation mode, the image scanner decodes the barcode then sendsdata in the same format as a wand scanner. The Code 39 Format converts allsymbologies to Code 39.The Same Code Format transmits UPC, EAN, Code 128 and Interleaved 2 of 5without any changes, but converts all other symbologies to Code 39. 2Dsymbologies are converted to Code 128.TheCode 39 Format barcode below sets the terminal ID to 61, and theSameCode Format barcode sets the terminal ID to 64.Default = Code 39 Format.Wand Emulation Data Block SizeThis transmits the data in smaller blocks to prevent buffer overflow.Default = 40.Code 39 FormatSame Code Format2080* 4060
