4 - 6 2020/4820/4820 i User’s GuideScan Stand ModeNote: Scan Stand Mode is only available for non-light bar units with softwarerevision 1205481-018 or older. Refer to the Show Software Revision onpage 11-2 for information on determining the engine in your unit.When a unit is in Scan Stand mode, it remains idle as long as it sees the ScanStand symbol. (SeeScan Stand Symbol that follows.) When a different codeis presented, the image scanner is triggered to read the new code.Note:The image scanner automatically adjusts the illumination LEDs to thelowest light level possible to maintain a good lock on the Scan Stand symbol.When a symbol is presented, the image scanner’s light levels adjust to the savedsetting (see LED Power Level on page 4-10). This mode requires at least 50 luxof ambient light to operate correctly.Scan Stand SymbolWhen a unit is in Scan Stand mode, the LEDs shine at the Scan Stand symbolon the base of the stand which tells it to remain idle. When the Scan Standsymbol is covered, the image scanner turns the LEDs on at the configured powerlevel (Default High) and attempts to find and decode barcodes in its field of view.Scan Stand ModeScan Stand Symbol
