Hand Held Products 3800i User Manual

Contents

Hand Held Products 3800i User Manual Manual pdf 51 page image

3800i/3800r User’s Guide 3 - 7Aimer Beam Delay (Aimer Beam option only)The Aimer Beam Delay allows a delay time for the operator to aim the readerbefore the standard illumination and decoding starts. The quickset codes setsthe time between when the trigger is pulled and when the decode starts to either1 or 2 seconds. During the delay time, the aiming beam appears, but theillumination LEDs won’t turn on until the delay time is over.User-Specified Aimer Beam DelayIf you want to set your own length for the duration of the delay, scan the bar codebelow, then set the time-out by scanning digits (0 - 4000 ms) from theProgramming Chart inside the back cover of this manual and then scan Save.Aimer Mode (Aimer Beam option only)If you are reading codes in applications that exhibit high ambient light, you canturn on the aimer beam to assist you in reliably finding and scanning a code.SelectOff if you don’t want to use the aimer beam.2 seconds1 second* Off (no delay)Delay DurationOff* On