7 - 16 3800i/3800r User’s GuideCode 128 Message LengthScan the bar codes below to change the message length. Refer to MessageLength on page 7-2 for additional information. Minimum and Maximumlengths = 0-80. Minimum Default = 0, Maximum Default = 80.Code 128 Code PageCode pages define the mapping of character codes to characters. If the datareceived does not display with the proper characters, it may be because the barcode being scanned was created using a code page that is different from the onethe host program is expecting. If this is the case, scan the bar code below, selectthe code page with which the bar codes were created from the chart, Code PageMapping of Printed Bar Codes on page A-4, and scan the value and the SAVEbar code from the Programming Chart inside the back cover of this manual. Thedata characters should then appear properly.Code 128 Function Code TransmitBy default, Code 128 function codes are not transmitted with Code 128 bar codedata. However, if you wish to transmit Code 128 function codes with the bar codedata, scan the Function Codes On bar code, below.Telepen Minimum Message LengthMaximum Message LengthCode 128 Code Page* Function Codes OffFunction Codes On
