Hand Held Products SV Series User Manual

Contents

6 - 4 Quick Check® SV Series User’s GuideIncrementing ExamplesDecrementing Examples~BU#Allows data match command ~BC to detect a Code 128 Function 1 character.This allows a check to make sure function 1 characters (F1) are correctly placedin applications involving GS1-128 symbols. # = 0 or 1.If ~BU0 is set - the ~BC command acts "normal" per the ~BC commanddescription.bb Number of characters in array.A value of 00 clears (dis-ables) this array....!!! Mask characters for defining positions in the data field notbeing checked....+++ Characters in the data field being checked. If + charactersare used, this marks the field and defines its size. Maximumfield lengths are 8 characters for numeric and 6 charactersfor alphanumeric. If a proper numeric or alphanumeric valueis placed in the field, this additionally become the initial valueexpected on the first data scanned after a power-up or reset.~BI010!!!!!!!+++ Increment is to be done in the last three charac-ters of the 10 character array.~BI010!!!!!!!234 Increment is to be done in the last three charactersof the 10 character array. Initial value scannedmust be 234.~BI010!!!!!+++!! Increment is to be done in location 6 through 8characters of the 10 character array.~BD010!!!!!!!+++ Decrement is to be done in the last threecharacters of the 10 character array.~BD110!!!!!!!C34 Decrement is to be done in the last threecharacters of the 10 character array. The initialvalue scanned must be C34 (base 36alphanumeric field).~BD010!!!!!+++!! Decrement is to be done in location 6 through 8characters of the 10 character array.~BI000 or ~BD000 Disable the Increment/Decrement array. Theremainder of the array data is not required.