Hardi ZENIT 400 Original Instruction Book

Contents

113 - DescriptionUse of the mist blowerThe HARDI mist blower is designed for applying chemical products used for crop protection. This equipment may onlybe used for this purpose. The use of this equipment for other purposes is not allowed. If there is no special law in yourregion which obliges the user to have a permit, it is recommended to be well-prepared for protecting crops in a correctway and for handling chemical products safely so as to avoid unnecessary risks to people and the environment whilespraying takes place.For environmental issues the air kit is offered with option to close either left or right side of the air stream from theblower. These blinds, are mandatory in some sensitive areas, to avoid chemical contaminated air, blowing towards riversides and water channelsRoadworthinessWhen driving on public roads and other places where the road safety code or where there are other special rules andregulations for marking and lights on machinery, the machine must be equipped to comply with these regulations.ATTENTION! For models not fitted with brakes the maximum speed is 25 km/h and 40 km/h for those with. Thiscould vary according to local legislation. Contact your local authorities to find out the current maximum speedlimits.Identification plateThe identification plate is located on the front right-hand side of themachine and is riveted to the chassis. It indicates the make, model,serial number, and date of manufacture.The serial number is also engraved onto the chassis. The number isfound above the identification plate, as indicated in the picture. Theserial number consist of five digits.ChassisThe monoblock cold-pressed metal chassis is highly durable and built to last under everyday use under extremeconditions. It is manufactured using only the most advanced laser cutting and automated soldering processes. To protectagainst corrosion it is coated with a polyurethane bi-component paint on top of a highly adherent, steel blasted base.