946 - MaintenanceLubricationGeneral informationAlways store lubricants clean, dry and cool - preferably at a constant temperature - to avoid contamination from dirtand condensed water. Keep oil filling jugs, hoppers and grease guns clean, and clean the lubricating points thoroughlybefore lubricating. Avoid skin contact with oil products for longer periods.Always follow the quality and quantity recommendations. If no quantity is recommended, feed the lubricator until newgrease becomes visible.Pictograms in lubrication & oiling plans designate:1. Lubricant to be used (see “Recommended lubricants” below).2. Recommended intervals. Shown in hours or with a symbol foroccasional maintenance.3. Amount to be used. Only shown if an amount is specified.ATTENTION! If the sprayer has been cleaned with a highpressure washer, lubrication of the entire machine isrecommended.Recommended lubricantsWhat to Lubricate? Lubricant Type Factory Use Recommended AlternativesBALL BEARINGS and PUMPLithium based greaseConsistency NLGI grade 2Viscosity (@40°C) > 460 cStSHELL Gadus S3 V550L 1Hardi pump grease cartridge(400g): Item no. 28164600MOBIL grease XHP 462TOTAL Multis Complex SHD460BOLTS Anti-corrosive wax PAVA PV 700 TECTYL 506 WDVALVES and SEALS (O-RINGS) NSF 51, NSF 61 siliconecompoundDOW CORNING MOLYKOTE111CompoundADD
