384 - Starting upHydraulic connectionsGeneral informationMake sure that the couplings are clean before fitting them!After pressing the brake pedal and when the system has filled with oil, check the level of hydraulic oil in the tractor andrefill if required.DANGER! Testing the hydraulic system should be done with care. Air may have entered the system and causesudden movements.DANGER! Oil leakage: Do not use your hands under any circumstances to locate a leakage in any point in thehydraulic system. Due to the system’s high pressure, the oil could penetrate the skin.Tractor requirementsHydraulic pressure of 180 Bat and a flow of 20 l/Min or 5 gal / min.Below you’ll find a table where the boom requirements are listed as 2D = 2 double acting hydraulic outlets 3D = doubleacting outlets etc.Converted to 1 Double acting outlet.All booms offer optionally a Small Joystick S3 or S5 to cover up to 5 double acting functions into just 1 double actingoutlet.Larger booms and sprayer with Combus circuit, are offered with V hydraulics, known as well as DAH – Direct activatedHydraulic.Boom Hydraulic rams Operated byOptional or defaultLinerFix NStart NStart Fix NAtlasStart H0 NStart H2 2D S3 or controlboxStart H3 3D S3 or controlboxAgile Fix H3 3D S3 or controlboxSolid FIX H3 3D S3 or controlboxSolid Convert H3 3D S3 or controlboxSolid GV Fix H5 5D S5 or controlboxSolid GV Convert H5 5D S5 or controlboxBoxerStart 2D or 3D or 5D S3 or S5 or controlboxAgile 2D or 3D or 5D S3 or S5 or controlboxSolid 3D or 5D S3 or S5 or controlboxCronosSolid H3 3D S3 or combusSolid GV H5 5D S5 or combusRider H3 3D S3 or combusRider HV H5 5D S5 or combusVaria Convert H5 5D S5 or combusVaria GV Convert H7 7D Combus
