534 - Starting upHydraulic adjustment of the Convert bracketsOptionally the boom ca has the side adjustment hydraulically, donefrom the tractor cabin.In that case let the above indicated friction pads are just as loos as itallow the inner tube to slide in and out easily.IRIS system setupThe IRIS application system is standard equipped with ceramic hollowcone nozzles. Each drop leg holds 8 nozzles per drop leg. If a curtainarea of the canopy is not meant to be sprayed, a small valve is fitted asper two nozzles that allow turning of the spray mist. If only one nozzleis needed in that area it is as well possible to fit a blind cap.In the valve A that allows the spray mist to pass on the nozzle, thereis a small no drip valve, that secures when the main switch turns ofthe spray mist, that all nozzles stops instantly, and do not spill on theground.The nozzles B are fitted in an adjustable support, in order to anglethem forward accordingly to forward speed, and there by not loosingspray mist behind the sprayer.The air outlet has an indicator C that shows the angling of the airwanes E which are adjusted by pressing bottom D in, and then moveup or down the vanes E.The air outlet in the lower part shall be orientated upwards to get thespray mist penetrating from down and upwards. The upper spout shallpoint downward in order to avoid drift. Those setting are accordinglyto grot hog the canopy, and adjustment is necessary during theseason, as the size of the canopy change.In order to get the optimal cross flow effect and penetrate the canopythe IRIS drop leg shall be set 10º , 15º , 20º or 30º forward, as indicatedin the adjustable part in the top of the drop leg. The forward angling isset accordingly to forward speed while spraying.CBEAD
