Installing options 57fi1› Microprocessor 2 connectorfi2› Microprocessor 1fi3› VRMfi4› Microprocessor orientation indicatorfi5› Heatsink retainerfi6› Heatsinkfi7› Microprocessor 2fi8› Terminator cardTo install an additional microprocessor:Note: Review the information in “Before you begin” on page43.Attention: When you handle Electrostatic Discharge-Sen-sitive devices (ESD), take precautions to avoid damage fromstatic electricity. For details on handling these devices, referto the following Web site and use a search term of ESD:http://www.ibm.com/.1. Review “Safety information” on page 155.2. Turn off the server and peripheral devices and discon-nect all external cables and power cords; then removethe cover (see “Removing the side cover” on page 44for details).3. Remove the support bracket and the air baffle frombehind the support bracket. Store them both in a safeplace.4. Lift up the release lever and remove the terminator cardfrom the microprocessor connector.5. Install the microprocessor:a. Touch the static-protective package containing thenew microprocessor to anyunpainted metal sur-
