SATA tape drivesignal connectorSATA tape cable12. Install the fan-bracket assembly.If you have other optional devices to install or remove, do so now. Otherwise, go to“Completing the installation” on page 81.Installing a SCSI tape drive in a 3.5-inch model serverUse these procedures to install a supported SCSI tape drive, such as the IBM DDSGeneration 5 Internal Tape Drive, and to connect the tape drive to a supportedSCSI adapter in PCI slot 1 of the riser-card assembly. See http://www.ibm.com/servers/eserver/serverproven/compat/us/ for the list of supported SCSI tape drivesand compatible SCSI adapters.Important: Make sure that the type of riser-card assembly (PCI Express or PCI-X)that is installed in the server is compatible with the type of SCSI adapter.Install the optional tape drive in the two bottom-left hard disk drive bays. If hard diskdrives are installed in those bays, move the drives to other bays.54 System x3650 Type 7979: User’s Guide
