Rear viewThe following illustration shows the connectors and LEDs on the rear of the server.Video connector: Connect a monitor to this connector.USB 1 connector: Connect a USB device to this connector.SP Ethernet 10/100 connector: Use this connector to connect the serviceprocessor to a network.SP Ethernet 10/100 activity LED: This LED is on the SP Ethernet 10/100connector. When this LED is lit, it indicates that there is activity between the serverand the network.SP Ethernet 10/100 link LED: This LED is on the SP Ethernet 10/100 connector.When this LED is lit, it indicates that there is an active connection on the Ethernetport.USB 2 connector: Connect a USB device to this connector.System serial connector: Connect a 9-pin serial device to this connector.SP Serial connector: Connect a 9-pin serial device to this connector.Mouse connector: Connect a mouse or other device to this connector.Keyboard connector: Connect a keyboard to this connector.Remote Supervisor Adapter II SlimLine status LED: When this LED flashes, itindicates that there is activity on the Remote Supervisor Adapter II SlimLine. Whenthis LED is lit continuously, it indicates that there is a problem with the RemoteSupervisor Adapter II SlimLine.Chapter 1. The System x3950 and System x3950 E server 11
