12The server can be turned off in any of the following ways:v You can turn off the server from the operating system, if your operating systemsupports this feature. After an orderly shutdown of the operating system, theserver will be turned off automatically.v You can press the power-control button to start an orderly shutdown of theoperating system and turn off the server, if your operating system supports thisfeature.v If the operating system stops functioning, you can press and hold thepower-control button for more than 4 seconds to turn off the server.v If the server is installed in a static partition, pressing the power-control button onthe primary node in the partition will start an orderly shutdown of the operatingsystem and turn off the server.v The server can be turned off from the Remote Supervisor Adapter II SlimLineuser interface.v If the Wake on LAN feature turned on the server, the Wake on LAN feature canturn off the server.v You can turn off the server through a request from the service processor.14 IBM System x3950 Type 8872 and System x3950 E Type 8874: User’s Guide
