IBM 88784RU User Manual

Also see for x3950 8872: Installation guide

Contents

b. Connect one end of an SMP Expansion cable to port 2 on node 2; then,route the cable through the node 2 cable-management arm. Use a 2.3-m(7.6-foot) SMP Expansion cable for this connection.c. Locate the SMP Expansion cable that is connected to port 3 on node 1;then, connect the opposite end of the cable to port 3 of node 2. Next, routethe cable through the node 2 cable-management arm.5. Connect the SMP Expansion cables to node 3:a. Locate the SMP Expansion cable that is connected to port 1 on node 2;then, connect the opposite end of the cable to port 1 of node 3. Next, routethe cable through the node 3 cable-management arm.b. Locate the SMP Expansion cable that is connected to port 2 on node 1;then, connect the opposite end of the cable to port 2 of node 3. Next, routethe cable through the node 3 cable-management arm.c. Connect one end of an SMP Expansion cable to port 3 on node 3; then,route the cable through the node 3 cable-management arm. Use a 2.3-m(7.6-foot) SMP Expansion cable for this connection.6. Connect the SMP Expansion cables to node 4:a. Locate the SMP Expansion cable that is connected to port 1 on node 1;then, connect the opposite end of the cable to port 1 of node 4. Next, routethe cable through the node 4 cable-management arm.b. Locate the SMP Expansion cable that is connected to port 2 on node 2;then, connect the opposite end of the cable to port 2 of node 4. Next, routethe cable through the node 4 cable-management arm.c. Locate the SMP Expansion cable that is connected to port 3 on node 3;then, connect the opposite end of the cable to port 3 of node 4. Next, routethe cable through the node 4 cable-management arm.7. Route any remaining cables through the cable-management arms.8. Secure the cables in the cable-management arms with the hook-and-loop strapsthat come with the server.Eight-node configurationAn eight-node configuration requires four 2.9-m (9.5-foot) XpandOnDemandScalability cable kits and eight 2.3-m (7.6-foot) XpandOnDemand Scalability cablekits. To cable an eight-node configuration for up to 32-way operation, complete thefollowing steps:1. Remove the protective covers from the connectors on the ends of the cables.Protective cover2. Label each end of the SMP Expansion cables according to where it will beconnected to each server. See the following illustration.52 IBM System x3950 Type 8872 and System x3950 E Type 8874: User’s Guide