IBM Aptiva 2162 Series Hardware Maintenance Service

Power Supplies (with Rapid Resume Features) The power supply is a 145-W switchable high/low voltage power supplywith a variable fan speed and a connector for a detachable grounded3-wire power cord. The power cable has four DASD connectors: onemini power connector and three standard 4-pin connectors. The powersupply also has a non-switched appliance outlet connector. For some countries outside the United States, the power supply mighthave five standard 4-pin connectors and one mini power connector, fora total of six DASD connectors. To support the Rapid Resume feature, all power supplies have a 3-wireauxiliary control cable that connects to the system board. There is noon/off switch cable assembly for the power supplies.CablesAll models contain one cable for hard disk drives and one cable fordiskette drives. A momentary power switch and cable assembly thatconnects to the system board, a Wake Up on Ring modem cable, and avoice modem cable are also included.Diskette Drive—AT-typeAll models except Japan contain a 3.5-in. 1.44 MB slimline diskettedrive.Japan models support 3.5-in. 1.2 MB mode 3 diskette drive.Multimedia 5.25-in. high-performance, 8-16X CAV (Constant Angular Velocity)CD-ROM IDE/AT drive that can read data and play audio from standardand mini CD-ROM and audio compact discs (audio CDs). It iscompatible with industry-standard multimedia requirements.Note: CAV CD-ROM drives run at a constant speed. This causeseight-speed reading at the disk hub and sixteen-speed readingat the disk edge. An audio cable Sound adapter card (on some models) A CD-ROM drive system interface cable. One pair of speakers integrated into monitor. Sub Woofer (on some models). Microphone integrated into monitor. Joystick (on some models).1-8