IBM Aptiva 2162 Series Hardware Maintenance Service

Table 2-1 (Page 15 of 27). POST and Diagnostics and Utilities Indexfor Symptoms, Messages, Error Codes, or BeepsSymptoms, Messages, ErrorCodes, or BeepsAction/FRUSerial or parallel port devicefailure (adapter port).“Factory-Installed Drive Devices” onpage 2-49Test using a wrap plug while runningDiagnostics and Utilities. Before testing,ensure serial port A is set to address 3F8or 3E8, whichever is not used by theModem card (modem settings:COMM1=3F8, COMM2=3E8). Set serialport B to address 2F8 or 2E8.DeviceCable/connectionsAlternate adapterSystem BoardRiser CardSorry You Need A Mouse.Mouse or mouse driver was notdetected.MouseSystem BoardSound adapter card orfactory-installed adapter cardsoftware gives a MicrosoftWindows 95 error message afterPOST configuration.Hardware problem occurred.“Diagnostics for Factory-Installed RiserCard, and Sound Card” on page 2-55Sound card or adapter cardconnection/cableSound card or adapter cardSystem fails to load theDiagnostics and Utilities softwareSystem preloaded softwareworks correctly.Make sure the CD-ROM drive or diskettedrive is included in the Setup Utility startupsequence.“Factory-Installed Drive Devices” onpage 2-49CD-ROM drive connection/cableCD-ROM driveDiskette drive connection/cableDiskette driveMedia ConsoleMedia Console host cardMedia Console client cardMedia Console cableSystem Board2-24