154 IBM BladeCenter PS703 and PS704 Technical Overview and Introduction5.1.4 TerminologySDMC uses the terminology that has been established in IBM Systems Director. Many of theterms used in the HMC and IVM context have changed with SDMC. Table 5-3 correlatessome of the more common HMC and IVM terms with those used for SDMC.Table 5-3 SDMC Comparison of terms5.2 Using the web interfaceSDMC provides a web interface similar to that of the HMC. Once the SDMC appliance ispowered up, you should see the SDMC login window.You can also access SDMC remotely using a browser. The supported browsers are the sameas IBM Systems Director and are currently Firefox versions 3, 3.5, and 3.6, and InternetExplorer versions 7 and 8. For logging in remotely, open the browser and point the browser tothe following URL (where system_name is the host name or IP address of the SDMC system):https://system_nameA login page opens as shown in Figure 5-1 on page 155.HMC/IVM terminology SDMC terminology Additional notes/where usedManaged System Server -LPAR/Logical Partition Virtual Server -DLPAR Manage Virtual Server -Systems Management Power Systems Resources Navigation Menu itemServers Hosts Navigation Menu itemServer names Server names Navigation Menu itemSystem Plans System Configuration ManageSystem PlansSystem plans are not supportedon POWER based bladesHMC Management Settings tab -Service Management System Status and Health ProblemsNavigation Menu itemUpdates Release management PowerFirmware Managementright click server name, used forsystem firmware updatesUpdates Release management Updates Navigation Menu itemnot applicable Operating System Systems Director function ofmanaging an operating systemFrame / BPA Power Unit Does not apply to blades
