send "ATS0=0\r" # Set AutoAnswer OFFexpect "0\r" timeout 2 # Confirm command successful.doneconnect: send "ATDT%N\r" # Tone dialing command.# %N from Call Home setup.# Expect a connection response.expect "16\r" or "15\r" or "14\r" or "12\r" or "10\r" or "5\r" or "1\r" busy "7\r"timeout 60doneretry: send "A/" # Repeat the previous command.# Expect a connection response.expect "16\r" or "15\r" or "14\r" or "12\r" or "10\r" or "5\r" or "1\r" busy "7\r"timeout 60donedisconnect:delay 2 # Separate from previous data.send "+++" # Assure command mode.delay 2 # Allow mode switching delay.send "ATH0T\r" # Set modem switch-hook down# (i.e., hang up).ignore "0\r" or "OK\r" timeout 2 # Ignore modem response.send "ATE0Q1\r" # Initialize modem: Echo OFF,# Disable responses.ignore "0\r" timeout 1donecondin: send "ATZQ0T\r" # Reset to factory defaults.ignore "0\r" or "OK\r\n" timeout 2 # Ignore modem response.send "ATE0T\r" # Initialize modem: Echo OFF,expect "0\r" or "OK\r\n" timeout 2 # Enable responses (Numeric),send "ATQ0V0T\r" # Limit response codes.expect "0\r" timeout 2 # Confirm commands successful.send "ATS0=2\r" # Set AutoAnswer ONexpect "0\r" timeout 2 # Confirm command successful.donewaitcall: ignore "2\r" timeout 1 # Ignore first ring.expect "2\r" timeout 10 # Pick up second ring# or timeout.# Expect a connection response.expect "16\r" or "15\r" or "14\r" or "12\r" or "10\r" or "5\r" or "1\r"timeout 60donepage: send "ATDT%N,,,,%R;\r" # %N = pager call center number# Add enough commas to wait for# time to enter paging number.# %R = paging number# Confirm successful command.226 S80 and S85 User’s Guide
