Diagnostic Error Code FRU/Action030-197-XXXSCSI interface test warning 1. Make sure the component that is called out isconnected and/or enabled2. Re-run test3. Component that is called out in warning statement4. Component under test030-198-XXXSCSI interface test aborted 1. If a component is called out, make sure it isconnected and/or enabled2. Flash the system and re-test3. Go to the ″Undetermined problems″ section030-199-XXXSCSI interface test failed, causeunknown 1. Go to the ″Undetermined problems″ section2. Flash the system and re-test3. Replace component under function test035-000-XXXRAID interface Test Passed 1. No action035-0XX-XXXRAID interface Failure 1. RAID signal cable2. RAID device3. RAID adapter card, if installed4. System board035-195-XXXRAID interface Test aborted byuser 1. Information2. Re-start the test, if necessary035-196-XXXRAID interface test halt, errorthreshold exceeded 1. Press F3 to review the log file2. Re-start the test to reset the log file035-197-XXXRAID interface test warning 1. Make sure the component that is called out isconnected and/or enabled2. Re-run test3. Component that is called out in warning statement4. Component under test035-198-XXXRAID interface test aborted 1. If a component is called out, make sure it isconnected and/or enabled2. Flash the system and re-test3. Go to the ″Undetermined problems″ section035-199-XXXRAID interface test failed, causeunknown 1. Go to the ″Undetermined problems″ section2. Flash the system and re-test3. Replace component under function test071-000-XXXAudio port Interface Test Passed 1. No action14 Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648,6649
