Follow the steps below to locate the IBM PC Enhanced Memory Diagnosticstest options.1. Select the DIAGNOSTICS option on the toolbar and press Enter.2. Highlight either the Memory Test-Full or Memory Test-Quick option andpress Enter.3. Memory Test-FullThe full memory test will take about 80 seconds per MB of memory andwill detect marginal, intermittent, and solid (stuck) memory failures.4. Memory Test-QuickThe quick memory test will take about 20 seconds per MB of memory andwill detect solid (stuck) memory failures only.NotesEither level of memory testing can be performed on all memory or asingle SIMM or DIMM socket.Only sockets containing a SIMM or DIMM can be selected for testing.Unpopulated sockets are noted by ........ beside the test description.Alert-On LAN ™ testThe Alert On LAN test does the following:v Determines if Alert On LAN is supported on the system.v Checks the revision ID register.v Verifies the EEPROM checksum.v Validates that a software alert can be sent.Asset ID ™ testThe Asset ID test does the following:v Determines if Asset ID is supported on the system.v Verifies the EEPROM areas.v Performs an antenna detection test.Test resultsIBM PC Enhanced Diagnostic test results will produce the following errorcode format:Function Code Failure Type DeviceID Date ChkDigits Textv Function Code:Represents the feature or function within the PC.v Failure Type:Chapter 2. Types 6568/6569/6648/6649 37
