Connector Description1 Digital video interface(DVI) connectorUsed to attach a digital monitor. This connector providesthe signals necessary to support the Display PowerManagement Signaling (DPMS) standard.2 S-Video connector Used to attach a television set that has a S-Video connector.The S-Video cable (required to connect the television set tothe adapter) is a separately purchased item.3 SVGA monitorconverterUsed to attach an analog SVGA monitor to the AGP DVIconnector. This SVGA converter is not used in this machinetype.4 SVGA monitorconverterUsed to attach an analog SVGA monitor to the AGP DVIconnector.5 Monitor cable Connects monitor to video output from computerAudio adapterConnector1 MIDI/joystick connector2 Audio line-out connector3 Microphone connector4 Audio line-in connectorADSL modemDepending on how the user’s home or office is wired, the ADSL modem useseither wires 2 and 5 or wires 3 and 4 of the telephone-line wall connector. Refer tothe label on the back of the ADSL modem and set the switch on the back of theADSL modem to match the wiring scheme. If you do not know which wiringscheme to use, contact the user’s ADSL service provider.Replacing the cover1. Position the cover on the chassis, aligning the tabs on the cover with the slotson the chassis.2. Slide the cover toward the front bezel of the computer until the cover snapsinto place.3. Replace the two screws and engage the keylock (if any).38 IBM NetVista Type 6838, 6848: Hardware Maintenance Manual
