IBM NetVista Hardware Maintenance Manual

Also see for NetVista: Hardware Maintenance Manual Hardware Maintenance Manual Hardware maintenance guide Hardware Maintenance Manual Hardware maintenance guide

Contents

Diagnostic Error Code FRU/Action086-032-XXX Mouse Port interface Devicecontroller failure 1. Mouse2. System board086-035-XXX Mouse Port interface Reset 1. Mouse2. System board086-040-XXX Mouse Port interface IRQfailure 1. Run Setup2. Mouse3. System board086-195-XXX Mouse Port interface Testaborted by user 1. Information2. Re-start the test, if necessary086-196-XXX Mouse Port interface test halt,error threshold exceeded 1. Press F3 to review the log file2. Re-start the test to reset the log file086-197-XXX Mouse Port interface testwarning 1. Make sure the component that is calledout is connected and/or enabled2. Re-run test3. Component that is called out in warningstatement4. Component under test086-198-XXX Mouse Port interface testaborted 1. If a component is called out, make sure itis connected and/or enabled2. Flash the system and re-test3. Go to the ″Undetermined problems″section086-199-XXX Mouse Port interface test failed,cause unknown 1. Go to the ″Undetermined problems″section2. Flash the system and re-test3. Replace component under function test089-000-XXX Microprocessor Test Passed 1. No action089-XXX-XXX Microprocessor failure 1. Microprocessor(s)2. System board089-195-XXX Microprocessor Test aborted byuser 1. Information2. Re-start the test, if necessary089-196-XXX Microprocessor test halt, errorthreshold exceeded 1. Press F3 to review the log file2. Re-start the test to reset the log file089-197-XXX Microprocessor test warning 1. Make sure the component that is calledout is connected and/or enabled2. Re-run test3. Component that is called out in warningstatement4. Component under test089-198-XXX Microprocessor test aborted 1. Flash the system and re-test2. Go to the ″Undetermined problems″sectionChapter 7. Symptom-to-FRU index 63