IBM P275 Operating Instructions Manual

Contents

IBM P275 Operating Instructions Manual Manual pdf 16 page image

14USAdditional settings (OPTION)You can lock the controls, change the on-screen language, changethe menu position, and set the COLOR mode.1 Press the button.The menu appears on the screen.2 Press the m/M buttons to highlightOPTION and press the button.The OPTION menu appears on the screen.3 Press the m/M buttons to select the desiredadjustment item.Adjust the selected item according to the followinginstructions.xxxx Locking the controls (CONTROL LOCK)You can protect the adjustment data by locking the controls.Press the m/M buttons to highlight (CONTROLLOCK) and press the button. Then press the m/Mbuttons to select ON and press the button.Only the ! (power) button, button, (input) switch, ,and (CONTROL LOCK) of the OPTION menu willoperate. If any other items are selected, the mark appears onthe screen.To cancel the control lockRepeat the procedure above and set (CONTROL LOCK) to OFF.xxxx Changing the on-screen language(LANGUAGE)See page 7.xxxx Changing the menu’s position(OSD POSITION)Change the menu’s position if it is blocking an image on thescreen.Press the m/M buttons to select (OSD POSITION)for horizontal adjustment, or (OSD POSITION) forvertical adjustment and press the button. Thenpress the </, buttons to shift the on-screen menu.Then press the button.xxxx Setting the COLOR modeSee page 12.Resetting the adjustments (RESET)This monitor has the following 2 reset methods.xxxx Resetting all the adjustment data for thecurrent input signal1 Press the button.The menu appears on the screen.2 Press the m/M buttons to highlight0 RESET and press the button.3 Press the m/M buttons to select 01 (CURRENTMODE) and press the button.4 Press the m/M buttons to select OK.Note that the following items are not reset by this method:• on-screen menu language (page 7)• color mode setting in the OPTION menu (PRESET,VARIABLE, EXPERT, sRGB) (page 12)• color temperature setting in the PRESET mode (9300K,6500K, 5000K) (page 12)• on-screen menu position (page 14)xxxx Resetting all of the adjustment data for allinput signalsSelect 02 (ALL MODES) in step 3 above.NoteThe RESET function does not function when (CONTROL LOCK)is set to ON.RESETCURRENTMODECANCELOK121 6 0 0 x 1 2 0 0 / 8 5 H z