IBM P275 Operating Instructions Manual

Contents

IBM P275 Operating Instructions Manual Manual pdf 6 page image

4US8 Video input connector 2 (DVI) (2 ) (page 4)Inputs RGB video and sync signals (0.700 Vp-p, positive)through a DVI-A connector.* Display Data Channel (DDC) Standard of VESASetupThis monitor works with platforms running at horizontalfrequencies between 30 and 130 kHz.Step 1: Connect your monitor toyour computerTurn off the monitor and computer before connecting.Connect the appropriate end of the video signal cable to the videooutput of your computer.Connect the other end of the video signal cable to the appropriateinput of the monitor.If you attach the video signal cable to the video input connector 1on the back of the monitor, set the (input) switch on the frontof the monitor to 1.Notes• Do not touch the pins of the video signal cable connector as this mightbend the pins.• When connecting the video signal cable, check the alignment of thevideo input connector. Do not force the video input connector in thewrong way or the pins might bend.AC INRear8 7 6 5 4 3 2 1C2 C1C5C4 C316 15 14 13 12 11 10 924 23 22 21 20 19 18 17Pin No. SignalC1 RedC2 GreenC3 BlueC4 H. SyncC5 Ground (R/G/B)1 —2 —3 —4 —5 —6 DataClock(SCL)*7 Bi-DirectionalData (SDA)*8 V.Sync9 —Pin No. Signal10 —11 —12 —13 —14 DDC + 5V*15 Ground16 Hot Plug Detect17 —18 —19 —20 —21 —22 —23 —24 —AC INTo a computer with aDVI video outputforward sideforward sidebackward sidebackward sideTo a computerwith an HD15video output(continued)