IBM P275 Operating Instructions Manual

Contents

IBM P275 Operating Instructions Manual Manual pdf 5 page image

3USIdentifying parts and controlsSee the pages in parentheses for further details.1 (input) switch (page 6)This switch selects 1 (video input connector 1: 1 ) or 2(video input connector 2: 2 ).2 6m(contrast/down) and M (brightness/up)buttons (pages 6 – 14)These buttons are used to display the CONTRAST/BRIGHTmenu and to highlight the desired menu item.3 button (pages 6 – 14)This button is used to display the menu and to select the menuitem and to activated the adjustment.4 </, buttons(pages 6 – 14)These buttons are used to make the adjustment.5 ! (power) button and indicator (pages 5, 15, 17, 19)This button turns the monitor on and off. The power indicatorlights up in green when the monitor is turned on, and lights upin orange when the monitor is in power saving mode.6 AC input connector (page 5)This connector provides AC power to the monitor.7 Video input connector 1 (HD15) (1 ) (page 4)Inputs RGB video signals (0.700 Vp-p, positive) and syncsignals.* Display Data Channel (DDC) Standard of VESAAC INFront Rear5 4 3 2 16789101112131415(continued)Pin No. Signal1 Red2 Green(Sync onGreen)3 Blue4 ID (Ground)5 DDC Ground*6 Red Ground7 Green GroundPin No. Signal8 Blue Ground9 DDC + 5V*10 Ground11 ID (Ground)12 Bi-DirectionalData (SDA)*13 H. Sync14 V. Sync15 Data Clock(SCL)*