Table 5. Service Processor Error Codes. (continued)Error Code Description Action/Possible Failing FRU4B23 26FB Description: 2-way processor card faultAction: This error code indicates that the processor repeat gard function has deconfigured aprocessor. Do the following:1. Go to the processor configuration/deconfiguration menu, located under the system informationmenu in the service processor menus.Look at the status of the processors. If any of the processors have a status of manuallydeconfigured, reconfigure the processor(s) and boot the system to the SMS menus. Power offthe system using the white power button and look again at the status of the processors. If all ofthe processors are still configured in the processor configuration/deconfiguration menu, theproblem has been resolved.If any of the processors have a status of deconfigured by the system, either before or after theboot to the SMS menus, go to step 2.2. Replace the processor card (on which the deconfigured processor resides) specified by thelocation code.4B23 26FD Description: 1-way processor card faultAction: This error code indicates that the processor repeat gard function has deconfigured aprocessor. Do the following:1. Go to the processor configuration/deconfiguration menu, located under the system informationmenu in the service processor menus.Look at the status of the processors. If any of the processors have a status of manuallydeconfigured, reconfigure the processor(s) and boot the system to the SMS menus. Power offthe system using the white power button and look again at the status of the processors. If all ofthe processors are still configured in the processor configuration/deconfiguration menu, theproblem has been resolved.If any of the processors have a status of deconfigured by the system, either before or after theboot to the SMS menus, go to step 2.2. Replace the processor card (on which the deconfigured processor resides) specified by thelocation code.4B23 26FE Description: 2-way processor card faultAction: This error code indicates that the processor repeat gard function has deconfigured aprocessor. Do the following:1. Go to the processor configuration/deconfiguration menu, located under the system informationmenu in the service processor menus.Look at the status of the processors. If any of the processors have a status of manuallydeconfigured, reconfigure the processor(s) and boot the system to the SMS menus. Power offthe system using the white power button and look again at the status of the processors. If all ofthe processors are still configured in the processor configuration/deconfiguration menu, theproblem has been resolved.If any of the processors have a status of deconfigured by the system, either before or after theboot to the SMS menus, go to step 2.2. Replace the processor card (on which the deconfigured processor resides) specified by thelocation code.Chapter 5. Error Code to FRU Index 329
