the cable cannot be removed. Fasten the cable ends together with a lock. Afteryou add the security cable, make sure that it does not interfere with othercables that are connected to the server.If you have other devices to install or remove, do so now; otherwise, go to“Completing the installation.”Completing the installationTo complete the installation, you must reinstall the two-piece bezel, reinstall the sidecover, connect all the cables and, for some devices, run the Configuration/SetupUtility program. Follow the instructions in this section.Reinstalling the two-piece bezelTo reinstall the two-piece bezel, complete the following steps:1. Install the upper bezel on the front of the server chassis:a. Insert the two right-side tabs on the upper bezel into the matching holes onthe right side of the chassis.b. Rotate the upper bezel to the left side of the chassis and press the bezelclips into the matching indentations on the left side of the chassis until thebezel clips snap into place.42 System x3200 Types 4362 and 4363: User’s Guide
