IBM x3350 - System - 4192 Installation Manual

Also see for System x3350 Type 4192: User guide

Contents

Pull the cover straight back and off the power supplies; then, remove it andstore it in a safe place.3. If you are planning to install or remove a memory module, PCI adapter, battery,or other non-hot-swap optional device, turn off the server and all attacheddevices and disconnect all external cables and power cords (see “Turning offthe server” on page 24).4. Press down on the left and right side latches and pull the server out of the rackenclosure until both slide rails lock.Note: You can reach the cables on the back of the server when the server is inthe locked position.5. Loosen the thumbscrew at the back of the server.ThumbscrewFan door6. Slide the two cover-release latches on the fan door on the right side of the topof the server back; then, open the fan door cover.10 IBM System x3350 Types 4192 and 4193: Installation Guide