13IDS 805 Installer Manual 700-266-02H Issued September 200911. Download CodeA download code is used for download access. The default download code is 9999. Via the downloadingit is possible to set a location to either allow or disallow defaulting of the download code. The location isonly accessible using the download software. If selected to allow defaulting of the download code, thedownload code will be defaulted to 9999 if the panel is defaulted. A value of [10] programmed into thislocation prevents the download code from being defaulted.This function may only be used with download software version 1.4.0 or later.12. Programming Instructions12.1 IntroductionThe panel may be programmed either using the keypad or using the up/download software.Programming the panel by means of the keypad is explained in the following sections of this manual. Forinformation on programming the panel using the up/download software refer to the manual pertaining tothe software.NOTE:Before commencing the programming, it is advisable to read the Installer Manual thoroughly.12.2 Location ValuesAll values within a program location are displayed by the zone indicators in binary format. The table belowindicates how these values may be read.Table 2: Value Represented by Each Zone IndicatorZone 1 1Zone 2 2Zone 3 4Zone 4 8To read a binary value on the keypad add the values represented by each lit LED. The total value is thenumber being represented e.g. assume the following zone indicators are on: Zone 1, Zone 3, and Zone4. The value would be as shown in the table below.Zone 1 1Zone 3 4Zone 4 8Total 13