12 IDS805 USER MANUAL NO. 700-266-01A ISSUED NOV 2003 VER 1.00IDS805 USER MANUAL3. Press [9] then press [1] or [2] for the required profile.4. Press [!!!!!] to enter. A long double beep should be heard.5. Program STAY and BUZZ zones for the profile or ARM theprofile (See sections 12 and 13).5.3.2 To Stay Arm[#] + [USER CODE](Do not leave premises)1. Select the required STAY PROFILE.2. Ensure that the READY indicator is illuminated; if not, checkthat all protected doors and windows are closed and that motionhas ceased in the areas covered by motion detectors.3. If necessary, close the front door.4. Press the [#] key to cancel any unintended entries.5. Enter a valid [USER CODE].6. DO NOT open the front door. If the front door is opened thesystem will arm in AWAY mode.7. The ARMED indicator will illuminate and the keypad buzzer willsound on and off for the duration of the exit delay.8. The AWAY indicator will remain extinguished.9. Any STAY zones (shown by a steadily illuminated indicator) willbe automatically bypassed.10. Ensure that you enter only those zones that are bypassed.5.4 Quick Stay Arming[5](Hold down the key until the keypad buzzer sounds)It is possible to STAY arm by holding down the [5] key until thekeypad beeps. There is no exit delay.5.5 Stay Arm and Go[6](Hold down the key until the keypad buzzer sounds)