IDS805 USER MANUAL NO. 700-266-01A ISSUED NOV 2003 VER 1.00 19IDS805 USER MANUAL5. The alarm memory will be erased the next time the system isarmed.10.2 Zone Bypassed MemoryThe Zone Bypassed Memory displays any zones which werebypassed during the most recent arming cycle.To Display Zone Bypassed Memory:[0] then [1]1. Hold down [0] until the keypad buzzer sounds.2. The READY indicator will extinguish and the keypad buzzer willsound briefly.3. Flashing zone indicators show which zones were violated duringthe last armed cycle.4. To view any bypassed zones, press the [1] key once.5. Zones that have have been bypassed will have flashingindicators.6. The memory status will be displayed for five seconds.7. The zone bypassed memory will only be erased if the [#] key ispressed while the memory is being displayed.10.3 Zone Tamper MemoryThe Zone Tamper Memory displays any zones where a tampercondition has occurred.To Display Zone Tamper Memory:[0] then [2]1. Hold down [0] until the keypad buzzer sounds.2. The READY indicator will extinguish and the keypad buzzer willsound briefly.3. Flashing zone indicators show which zones were violated duringthe last armed cycle.4. To view any tampered zones, press the [2] key once.