IDS IDS805 User Giude

Also see for IDS805: Installer manual Quick start guide

14 IDS805 USER MANUAL NO. 700-266-01A ISSUED NOV 2003 VER 1.00IDS805 USER MANUAL5.8 Arming with Entry/ exit or Follower Zones ViolatedThe system can be programmed to arm even if the entry/ exit orfollower zones are violated. Follow the normal arming procedures i.e.Enter a valid [ USER CODE ], but it is not necessary to close the frontdoor.5.9 Forced ArmingIf so programmed, the panel can be armed even if there are violatedzones. This means that a monitored window can be left open or otherzones can be violated and the panel will still arm. If the violated zone isthen cleared, the panel will resume monitoring the zone, hencecausing an alarm condition or initiation of entry delay, as appropriate, ifviolated.6. Zone Bypassing! The term BYPASS is used to describe a zone that has been de-activated; i.e. violation of a bypassed zone will not cause analarm.! It is used when:! access is needed to part of the protected area while thesystem is armed.! Zones cannot be bypassed once the system is armed.! Bypassed zones are automatically cancelled each time thesystem is disarmed and must be re-bypassed before the nextarming.6.1 To Bypass a Zone[!!!!!] + [ZONE NUMBER]1. Press the [!!!!!] key (while bypassing zones, violated zones will beflashing).2. Press the number corresponding to the zone you need to by-pass e.g. the [2] key if you wish to bypass zone 2.3. The relevant zone indicator will illuminate to indicate that the zone