IET Labs 1910 User And Service Manual

Contents

IET Labs 1910 User And Service Manual Manual pdf 37 page image

Introduction Page 33 of 1101.4 Rear Panel DescriptionFigure 1-2 shows the controls and connectors on the rear panel of the 1910 Inductance Analyzer.Table 1-2 identifies them with descriptions and functions.Figure 1-2: Rear Panel ViewTable 1-2: 1910 Rear Panel Controls and ConnectorsReference #Figure 1-2Name Type Function1 AC Inlet Module 3-prong receptacle and fusedrawFuse draw and 3-wire connection for AC powerSource. 2.5A, 250V fuse for 100-240 volt operation2 RS-232 9 pin DB-Type connector Input/Output connections for RS-232 interface3 Remote I/O 37 pin DB-Type connector Input/Output connections for handler interface4 IEEE-488 24 pin connector Input/Output connections for IEEE-488 interfaceNOTE:User cable specifications for use with CE Mark 1910RS-232 Shielded cable requiredRemote I/O Cable must be double shielded (inner braid and outer foil)IEEE-488 Shielded cable requiredREMOTE I/ORS 232 IEEE-488NO USER SERVICEABLE PARTS INSIDETO PREVENT ELECTRICAL SHOCKDO NOT OPEN COVERSREFER TO QUALIFIED PERSONMADE IN USACAUTION: FOR CONTINUEDPROTECTION AGAINST FIREHAZARD REPLACE ONLYWITH SAME TYPE ANDRATING OF FUSEFUSE 250V100-240V T2.5A 5x20mm!100-240V50 - 60Hz100 WATTS MAX1 432