Icom IC-M506 Instruction Manual

Also see for IC-M506: Specifications Instruction manual Instruction manual Service manual Service manual

Contents

10512 CONNECTIONS AND MAINTENANCEMB-132 installationNAn optional MB-132 FLUSH MOUNT is available for mounting thetransceiver to a flat surface, such as an instrument panel.KEEP the transceiver and microphone at least 1 meteraway from your vessel’s magnetic navigation compass.Using the template on page 112, carefully cut a hole intoqthe instrument panel, or wherever you plan to mount thetransceiver.Slide the transceiver through the hole, as shown below.wAttach the clamps on either side of the transceiver with 2eM5 × 8 mm supplied bolts. s-AKESURETHATTHECLAMPSALIGNPARALLELTOTHETRANSCEIVERBODYTighten the end bolts on the clamps (clockwise) so that therclamps press firmly against the inside of the instrumentcontrol panel.Tighten the locking nuts (counterclockwise) so that the trans-tceiver is securely mounted in position, as shown below.Connect the antenna and power cable, then return the in-ystrument control panel to its original place.rt