Icom IC-M506 Instruction Manual

Also see for IC-M506: Specifications Instruction manual Instruction manual Service manual Service manual

Contents

657 DSC OPERATIOND Receiving a Test Acknowledgement CallWhen a Test Acknowledgement Call is received:The alarm sounds for 2 minutes.±“Received ACK” pops up. The LCD backlight blinks for 2±minutes.Received Call logNThe transceiver automatically stores up to 50 distress mes-sages and 50 other messages, and they can be used as asupplement to your logbook.s7HILEINTHENORMALOPERATINGMODE h ” blinks in the upper rightcorner of the LCD when there is an unread DSC message.Distress messageDPush the soft key [LOG] to enter “RCVD CALL LOG” in theqDSC CALLS menu, or you can enter it through the Menuscreen.eMENUf ¶ eDSCf ¶ eReceived Call Logf(Push [MENU]) (Select icon) (Rotate Dial, then push [ENT].)Push [w Y] or [Z] to select “Distress,” then push [ENT]. s4HE$ISTRESSMESSAGESARESTOREDINh$ISTRESSv sh ” appears when there are unread DSC messages. sh ” appears when there are no unread DSC messages. s.OICONAPPEARSWHENTHEREARENO$3#MESSAGESq Push [ALARM OFF] to stopthe alarm and the blinkingbacklight. s)F;!,!2-/&&=ISNOTPUSHEDwithin 2 minutes, the nextscreen may appear, dependingon the received Category.w Push a soft key to select yourdesired action.[EXIT]± Push to return to the nor-mal operating mode. s4HE TRANSCEIVER EXITS THEDSC mode. sh ” continues to blink andthe Call is stored in the Re-ceived Call Log.