Icom IC-M506 Instruction Manual

Also see for IC-M506: Specifications Instruction manual Instruction manual Service manual Service manual

Contents

707DSC OPERATION12345678910111213141516D DSC Data OutputSelect an option for the DSC Data Output function.When receiving a DSC call, this function makes the trans-ceiver send the DSC data from its NMEA Output port to aconnected device.q Enter “DSC DATA OUTPUT” in the DSC Settings menu.eMENUf ¶ eDSC SETf ¶ eDSC Data Outputf(Push [MENU]) (Select icon) (Rotate Dial, then push [ENT].)w Rotate Dial to set the DSC Data Output function to “All Sta-tion,” “List Station” or “OFF,” then push [ENT]. s0USH;"!#+=TOCANCELANDRETURNTOTHE$3#3ETTINGSMENU(default)All Station : Outputs the call from any vessel from theNMEA Output port.List Station : Outputs the call from any vessels listed on theIndividual ID screen.OFF : Does not output any call to the external equip-ment.Push [EXIT] to return to the normal operating mode.eD AlarmSet the Alarm function ON or OFF, depending on the Cat-egory or Status.q Enter “ALARM” in the DSC Settings menu.eMENUf ¶ eDSC SETf ¶ eAlarmf(Push [MENU]) (Select icon) (Rotate Dial, then push [ENT].)w Rotate Dial to select the status, then push [ENT]. s0USH;"!#+=TOCANCELANDRETURNTOTHE$3#3ETTINGSMENU sh3AFETY vh2OUTINE vh7ARNING vh3ELF 4ERMINATEvANDh$ISCRETEvAREselectable. (default: ON)Rotate Dial to set the Alarm setting to “ON” or “OFF.”ePush [EXIT] to return to the normal operating mode.r