687DSC OPERATION12345678910111213141516DSC SettingsND Position Input (See page 22)D Add Individual ID/Group ID (See pages 19, 20)D Delete Individual ID/Group ID (See page 21)D Automatic AcknowledgementThese items set the Automatic Acknowledgement function to“Auto TX” or “Manual TX.”When an Individual, Position Request, Polling Request orTest Call is received, the transceiver automatically transmitsan Individual Acknowledgement, Position Reply, Polling Re-ply or Test Acknowledgement Call, respectively.When “INDIVIDUAL ACK” is set to “Auto TX,” the trans-ceiver automatically transmits the Acknowledgment callincluding “Unable to Comply” (No Reason Given) after re-ceivng the Individual call.q Enter either “INDIVIDUAL ACK,” “POSITION ACK” or “TESTACK” in the DSC Settings menu.eMENUf ¶ eDSC SETf ¶ eIndividual ACKf(Push [MENU]) (Select icon) (Rotate Dial, then push [ENT].)eMENUf ¶ eDSC SETf ¶ ePosition ACKfeMENUf ¶ eDSC SETf ¶ eTest ACKfRotate Dialw to select “Auto TX” or “Manual TX,” then push[ENT]. s 0USH ;"!#+= TO CANCEL AND RETURN TO THE $3# 3ETTINGS MENU(default)(default)(default)Push [EXIT] to return to the normal operating mode.e
