Icom IC-M506 Instruction Manual

Also see for IC-M506: Specifications Instruction manual Instruction manual Service manual Service manual

Contents

829AIS Receiver (Depending on versions)12345678910111213141516D Target list displayIn the plotter display, push [DISP] to switch to the target listdisplay, which shows all AIS targets being detected by thetransponder.The AIS target data is sorted by the distance from your ves-sel, and the closest target is located on the top of the list.s Push [∫] or [√] to select an AIS target.s Push [INFO] to display the detail screen of the selected AIS tar-get. (p. 83)s Push [DSC] to transmit DSC call to selected AIS target.qwq THE NUMBER OF TARGETSShows the number of AIS targets which are being detectedby the transponder.w TARGET INFORMATIONShows the following AIS target information: s--3)CODEORNAME, if the name is programmed. s2ANGE2.' FROMYOURVESSELTOTHETARGETUNITNAUTICALMILE s"EARING"2' FROMYOURVESSELTOTHETARGETUNITDEGREED Danger list displayIn the target list display, push [DISP] to switch to the dan-ger list display, which helps you to find any dangerous targetwhose CPA is within 6 nm (nautical miles) and TCPA is within60 minutes of your vessel.s Push [∫] or [√] to select an AIS target.s Push [INFO] to display the detail screen of the selected AIS tar-get. (p. 83)qwq THE NUMBER OF DANGEROUS TARGETSShows the number of AIS targets which are being detectedby the transponder.w DANGER TARGET INFORMATIONShows the following dangerous target information: s--3)CODEORNAME, if the name is programmed. s#0! #LOSEST0OINTOF!PPROACHUNITNAUTICALMILE s4#0!4IMETO#0!UNITMINUTE