Icom IC-R20 Instruction Manual
Also see for IC-R20: Price listInstruction manualService manualService manual
                                                                                        | |
Contents
| 
276 MEMORY CHANNELS Memory bank settingThe IC-R20 has a total of 26 banks (A to Z). Regular memorychannels, 000 to 999, are assigned into the desired bank foreasy memory management.qPush [MR S.MW] for 1 sec. to select the select memorywrite condition.• 1 short and 1 long beep sound.• “μ ” indicator blinks.w Rotate [R-DIAL] to select the desired memory channel.eWhile pushing [8 SET], rotate [R-DIAL] to select “BANK”item.• “BANK” item can also be selected by pushing [8 SET] severaltimes.• Bank group and channel number is displayed if the selectedmemory channel has already been assigned into a bank, theprevious.rWhile pushing [BAND], rotate [R-DIAL] to select the de-sired bank group from “A” to “Z.”• The bank group can also be selected by pushing [BAND] sev-eral times.tAfter releasing [BAND], rotate [R-DIAL] to select the bankchannel number from “00” to “99.”• Vacant bank channel numbers are only be displayed.yPush [MR S.MW] for 1 sec. to set the channel into thebank.• Return to the previous indication.-BNAME:FM>BANK-:A-00012μ.146.010Bank channel is selected with [R-DIAL]-BNAME:FM>BANK-:A-00012μ.146.010Bank group is selected with BANDFM>CLEAR-SKIP-:OFF-MNAME:-BNAME:-BANK-:----012μ.146 .010FM>BANK-:----012μ.146 .010is pushedAfter[R-DIAL]SET8SET8MRS.MWBANDSET TS:5.0kHz√MODE ANLAFCTSQLFM146 010PSKIP-DUP |
Related manuals for Icom IC-R20
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine