Icom IC-R20 Instruction Manual
Also see for IC-R20: Price listInstruction manualService manualService manual
                                                                                        | |
Contents
| 
367SCAN OPERATION Scan edges programmingScan edges can be programmed in the same manner asmemory channels. Scan edges are programmed into scanedges, 00A/00B to 24A/24B, in memory channels.q Push [VFO MHz] to select VFO mode.w Set the desired frequency:➥ Select the desired band with [BAND].➥ Set the desired frequency with [R-DIAL].➥ Set other data (e.g. offset frequency, duplex direction, tonesquelch, etc.), if desired.ePush [MR S.MW] for 1 sec. to select select memory writecondition.• 1 short and 1 long beeps sound.• “μ ” indicator blinks.rRotate [R-DIAL] to select the desired programmed scanedge channel from 00A to 24A.t Push [MR S.MW] for 1 sec.• 3 beeps sound• The other scan edge channel “B,” 00B to 24B, automatically se-lected when continuing to push [MR S.MW] after programming.yTo program a frequency for the other pair of scan edges,00B to 24B, repeat steps w and r.• If the same frequency is programmed into a pair of scan edges,programmed scan will not function.[R-DIAL]MRS.MW[EXAMPLE]: Programming 145.300 MHz into scan edges 03A.√ μMODE ANLAFCTSQLTSQLFMFM145 300PSKIP-DUP-DUP001 √ μMODE ANLAFCTSQLTSQLFM145 300PSKIP-DUP-DUP03A √ μMODE ANLAFCTSQLTSQLFM145 300PSKIP-DUP-DUP020>CLEARCLEAR-SKIPSKIP-:OFF:OFF-MNAME:MNAME:-BNAME:-BNAME:-BANKBANK-:----:----001001μ.146.010FM>CLEARCLEAR-SKIPSKIP-:OFF:OFF-MNAME:MNAME:-BNAME:-BNAME:-BANKBANK-:----:----03A03Aμ.--------------------------------Push for 1 sec. RotateMRS.MW Push for 1 sec.MRS.MW12345678910111213141516 |
Related manuals for Icom IC-R20
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine