Icom IC-R20 Instruction Manual
Also see for IC-R20: Price listInstruction manualService manualService manual
                                                                                        | |
Contents
| 
347SCAN OPERATION12345678910111213141516 Scan typesScanning searches for signals automatically and makes iteasier to locate new stations for contact or listening purposes.There are 7 scan types and 4 resume conditions to suit youroperating needs.FULL SCAN (p. 35) Repeatedly scans all frequen-cies over the entire band.Some frequency ranges arenot scanned according to thefrequency coverage of the re-ceiver’s version.150kHz3304.980MHzScanJumpSELECTED BAND SCAN(p. 35)Repeatedly scans all frequen-cies over the entire selectedband.BandedgeBandedgeScanJumpALL/SELECTED BANKSCAN (p. 37)Repeatedly scans all bankchannels or selected bankchannels. The skip scan isalso available.SKIPSKIPA99 A03A00 A01 A02A04A98 A05FREQUENCY/MEMORYSKIP FUNCTION (p. 39)Skips unwanted frequenciesor channels that inconve-niently stop scanning. Thisfunction can be turned ONand OFF by pushing andholding [5 SKIP] in eitherVFO or memory mode.BandedgeBandedgeScanSKIP SKIPJumpPROGRAMMED SCAN(p. 37)Repeatedly scans betweentwo user-programmed fre-quencies. Used for checkingfor frequencies within a speci-fied range such as repeateroutput frequencies, etc.Bandedge xxA xxBBandedgeScan edgesScanJumpMEMORY (SKIP) SCAN(p. 37)Repeatedly scans memorychannels except those set asskip channel. Skip channelscan be turned ON and OFFby pushing and holding [5SKIP] in memory mode.SKIPSKIPM 0 M 4M 1 M 2 M 3M 5M 199 M 6 |
Related manuals for Icom IC-R20
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine