Icom IC-R75 Instruction Manual

Also see for IC-R75: Price list Instruction manual Instruction manual Service manual

Icom IC-R75 Instruction Manual Manual pdf 18 page image

514RECEIVE FUNCTIONS■ Mode selectionThe following modes are available in the IC-R75:SSB (LSB/USB), CW, CW REV (CW reverse), FM,AM, RTTY and RTTY REV (RTTY reverse).➥ Push [SSB] to toggle between LSB and USB.➥ Push [CW/RTTY] momentarily to toggle betweenCW and RTTY.➥ Push [CW/RTTY] for 2 sec. to toggle between CWand CW reverse or RTTY and RTTY reverse.➥ Push [AM] to select AM.➥ Push [FM] to select FM.The selected mode is indicated in the functiondisplay.OPERATING MODE SELECTIONSSBAMPush momentarilyFMPush momentarilyCW/RTTYCW CW REV RTTY RTTY REVPush mode switchfor 2 sec.Push mode switchmomentarily.AMFMLSB USB■ Squelch and RF gainThe receiver uses the same control, [RF/SQL], toadjust one of either the RF gain or the squelch.[RF/SQL] adjusts either the RF gain or the squelchdepending on the operating mode selected and thecondition of the RF/SQL item in set mode (p. 30).• [RF/SQL] control priority* The RF gain is set to maximum level when the [RF/SQL]is set as [SQL] control.The RF (Radio Frequency) gain is used to adjust thereceiver gain.• Shallow rotation moves the S-meter to the right indicatingthe signal strength which can be received.The recommended position for RF gain is the 12o’clock position since this sets RF gain to the max.The SQUELCH removes noise output from thespeaker (closed condition) when no signal isreceived. The squelch is particularly effective for FM.It is also available for the other modes.• When operating in FM, first rotate the control fullycounterclockwise. Then, rotate the control clockwise tothe point where the noise just disappears. This is the bestposition. The squelch does not open for weak signalswhen it is set too deep.• A segment appears in the S-meter to indicate theS-meter squelch level.• When set as the [RF/SQL] controlSet modesettingUSB, LSB,CW, RTTY AM, FMSq (SQL) SQL* SQL*At (AUTO) RF GAIN SQL*rS (RF/SQL) RF/SQL RF/SQLRecommended levelMinimum RF gainAdjustable rangeRF gain adjustablerangeMaximum RF gainMaximum RF gainSquelch is open. S-meter squelchS-meter squelchthresholdNoise squelch threshold(FM mode)Shallow DeepSquelch is open.S-meter squelchNoise squelch (FM mode)Noise squelch (FM mode)• When set as the [SQL] control• When set as the [RF] control