Icom IC-R75 Instruction Manual

Also see for IC-R75: Price list Instruction manual Instruction manual Service manual

Icom IC-R75 Instruction Manual Manual pdf 31 page image

277SCANS■ Priority watch operationPriority watch checks for signals on a frequencyevery 5 sec. while operating on a VFO frequency.q Select memory mode with [V/M].w Select the desired memor y channel to bewatched with [UP Y] or [Z DN].e Select VFO mode.r Set [RF/SQL] closed.• If the [RF/SQL] control function is set as RF control,the squelch always opens. See pgs. 14, 30 for details.t Push [SCAN] for 2 sec. to start priority watch.• “SCAN” appears.y When a signal is received on a watch channel,the function display shows the watch channel and“SCAN” blinks.u To cancel the watch, push [SCAN].USBS1 3 5 7 9 20 40 60 dBAGCANT 1SCANVFOUSBS1 3 5 7 9 20 40 60 dBAGCANT 1SCANR XMEMO■ Auto memory write scanAuto memory write scan operates in the same wayas programmed scan. However, when a signal isreceived, the received frequency is automaticallywritten into memory channels (80 to 99).When the auto memory write scan starts, thepreviously written memory channels (80 to 99) arecleared.q Select VFO mode with [V/M].w Select the desired operating mode.• The operating mode can also be changed whilescanning.e Set [RF/SQL] closed.• If the [RF/SQL] control function is set as RF control,the squelch always opens. See pgs. 14, 30 for details.r Push [SCAN] to start the programmed scan.• “SCAN” appears while scanning.• If the same frequencies are programmed into the scanedge memory channel P1 and P2, programmed scandoes not start.t Push [MW] to start the auto memory write scan.• “80” blinks when auto memory write scan starts.y When the scan detects a signal, the frequency isprogrammed into a memory channel (80 to 99),starting from channel 80.u To cancel the scan, push [SCAN].8081828384•••989914.456.0014.567.0014.678.0014.890.0014.050.00----------------------------USB R XS1 3 5 7 9 20 40 60 dBAGCANT 1SCANVFOBLANKBLANK