Icom IC-R75 Instruction Manual
Also see for IC-R75: Price listInstruction manualInstruction manualService manual
                                                | |
Contents
| 
4114CONTROL COMMAND• Command tableSub commandCommand Description—00 Send frequency dataSame ascommand 06Same ascommand 0601 Send mode data—02 Read band edge frequencies—03 Read operating frequency04 Read operating mode—05 Set frequency data00*101*102*103*104*105*107*108*1Set LSBSet USBSet AMSet CWSet RTTYSet FMSet CW-RSet RTTY-R06*1 Add 00, 01 or 02for selecting wide,normal or narrowfilter, respectively.——07 Select VFO mode0001 – 0101*2Select memory modeSelect memory channel*2 P1=0100, P2=010108—09 Memory write—0A Memory to VFO—0B Memory clear000102042223B0B1D0D30EScan stopProgrammed/memory scan startProgrammed scan startAuto memory write scan startMemory scan startSelect memory scan startSet as non-select channelSet as select channelSet scan resume OFFSet scan resume ON0001020304050607080910111010 Hz (1 Hz) tuning step100 Hz tuning step1 kHz tuning step5 kHz tuning step6.25 kHz tuning step9 kHz tuning step10 kHz tuning step12.5 kHz tuning step20 kHz tuning step25 kHz tuning step100 kHz tuning step1 MHz tuning stepSub commandCommand Description002011 Attenuator OFFAttenuator ONSelect [ANT1]Select [ANT2]000112Announce with voice synthesizer(00=all data; 01=frequency andS-meter level; 02=receive mode)00010201 + level data13[CW PITCH] setting (0000=lowpitch to 0255=high pitch)1415161819Read squelch conditionRead S-meter level01020212224041Set preamp (00=OFF;01=preamp 1; 02=preamp 2)Set AGC time constant (00=OFF;01=S-fast; 02=fast; 03=slow)Set noise blanker (00=OFF; 01=ON)Set optional noise reduction(00=OFF; 01=ON)Set optional auto notch(00=OFF; 01=ON)Turn the receiver power ONTurn the receiver power OFFRead the receiver IDSend/read memory contents(See example 1 on p. 42)Send/read IF filter setting(See example 2 on p. 42)Send/read set mode contents(See example 3 on p. 43)0001001A 00 + data01 + data02 + data[AF] level setting (0000=max.CCW to 0255=max. CW)[RF] level setting (0000=max.CCW to 0255=11 o’clock)[SQL] level setting (0000=11o’clock to 0255=max. CW)[NR] level setting (0000=min. to0255=max.)Inside [TWIN PBT] setting(0000=max. CCW, 0128=center,0255=max. CW)Outside [TWIN PBT] setting(0000=max. CCW, 0128=center,0255=max. CW)09 + level data08 + level data07 + level data06 + level data03 + level data02 + level data |
Related manuals for Icom IC-R75
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine